Arthur_Martin AKG933A7OX Manual de usuario descargar pdf (Pagina 29)

WARNING! Put the mains

plug into the mains socket

only if all parts are back into

their initial position. There is

a risk of injury.

4. Light the burner.

Refer to "Oven - Daily use" chapter.

5. Turn the knob for the oven functions

on the minimum position.

6. Remove the knob for the oven

functions again.

7. Screw on slowly the bypass screw till

the flame becomes minimum and

stable.

8. Put the knob for the oven functions

back.

9. Set the maximum gas flow position on

the knob for the oven functions and let

the oven heat for at least 10 minutes.

10. Quickly turn the knob for the oven

functions from maximum to the

minimum gas flow position.

Control the flame. Make sure the flame

does not go out when you turn the knob to

the minimum gas flow position. There

must be a small regular flame on the oven

burner crown. If the flame goes out adjust

the oven burner again.

Gas grill injector replacement

1. Release the screws which keep the

grill burner in position A.

A

2. Release the burner injector with a 7

mm socket spanner and replace it with

a right one.

3. Assemble the burner in a reverse

sequence. Before you fix the screw,

make sure that the burner is pushed

correctly to the back panel.

Test the grill injectors.

Levelling

CAUTION! Remove all the

accessories from the oven.

1. Open the lid of the appliance and

disassemble it.

2. Disassemble the pan supports and all

the burner assemblies.

3. Put the appliance on the sidewall on a

clean and smooth surface. Place each

foot into a separate hole, in the plinth,

and rotate it clockwise.

29

1 2 ... 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios